 |
 |
|||||||||
 |
||||||||||
 |
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
||
 |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Flexible PVC Tubing
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Description |
|
Grayline 73A is an extruded polyvinyl chloride tubing designed to meet the requirements of FORD ESB-M4D103-A. This tubing is typically used as a wiring harness covering in automotive applications where flexibility at ambient and low temperatures is an important consideration.
|
73A |
Features |
|
|
|
Specifications |
|
|
|
Ordering Information |
|
|
|
|
|
| PROPERTY | TYPICAL RESULTS | TEST METHOD |
| Durometer, Shore A (15 Seconds) Aged 70 Hrs @102°C |
73 Pass |
ASTM D2240 ASTM D2240 |
| Specific Gravity +/- .02 | 1.31 | ASTM D792 |
| Tensile Strength (psi) | 2,200 | ASTM D412 |
| Elongation (%) | 370 | ASTM D412 |
| Brittleness Temperature, Pass ºC | -35 | ASTM D746 |
| Heat Aging, 70 hrs. @102°C (Change from unaged specimen) Tensile Strength (%) Elongation (%) |
-5 -15 |
ASTM D412 |
| Cold Flexibility, -40°C for 72 hrs. | Pass | 180° mandrel bend |
| Tear Strength (lb./in.) | 220 | ASTM D624 |
The values listed in this bulletin, to the best of our knowledge, are accurate. They are typical performance results and are not intended to be used as design data. We disclaim all liability in connection with the use of information contained herein or otherwise.
Revision: 10/4/06
PVC Tubing | Heat
Shrinkable PVC Tubing | Heat
Shrinkable Polyolefin Tubing
Polyurethane Tubing | Additional
Materials | Braided Fiberglass
Sleeving
 |
||
 |
 |
|
|
|
