Fiberglass Sleeving
Homepage » Wire Harness / Electrical Tubing » Braided & Expandable Sleeving » Fiberglass SleevingGrayline is proud to offer a complete line of braided fiberglass sleeving to meet your electrical, electronic and mechanical requirements.
| PRODUCT NAME |
TYPE | KEY FEATURES TYPICAL APPLICATION |
INSULATION CLASS/TEMP. RANGE |
NEMA GRADES AVAILABLE |
STD COLORS |
|---|---|---|---|---|---|
| VC-A VC-B VC-C |
Vinyl Coated Fiberglass | Good flexibility Excellent abrasion & cut-through resistance Low temperature applications Motor insulation Generator leads |
B (130°C); -20°C to +130°C |
TF-1 Type 3 Grade A (7000V) Grade B (4000V) Grade C (2500V) |
Black |
| AC-A AC-B AC-C1 AC-C2 |
Acrylic Coated Fiberglass | Excellent high temperature endurance Highly flexible Motor leads Welding equipment Alternator & starter applications |
F (155°C) -25°C to +155°C |
TF-1 Type 6 Grade A (7000V) Grade B (4000V) Grade C1 (2500V) Grade C2 (1500V) |
Natural |
| SR-A SR-B SR-C |
Silicone Rubber Coated Fiberglass | Extremely flexible Good cut-through resistance Thermal insulation on oxygen sensors Insulation of motor & appliance leads |
H (200°C) -70°C to +200°C |
TF-1 Type 5 Grade A (7000V) Grade B (4000V) Grade C1 (2500V) |
White, Black, Transparent (Natural) |
| ES | Expandable Silicone Rubber-Coated Fiberglass | Naturally conforms to irregular shapes Thermal cutoffs in appliances Bus bar insulation |
H (200°C) -55°C to +200°C |
TF-1 Type 5 Grade A (7000V) |
Black, White |
| HT-1 HT-2 |
Heat-Treated Fiberglass | Flame Retardant Standard & heavy wall available Mechanical protection Additional thermal protection |
C (240°C) -60°C to +650°C |
TF-2 Grade C3 No dielectric value guaranteed. Determined by space value |
Natural |
| AS-1 AS-2 |
Acrylic Saturated Heat-Treated Fiberglass | Fray resistant Standard & heavy walls available Heating elements Lighting fixture Ignitor & component leads |
C (240°C) -60°C to +650°C |
TF-2 Grade C3 No dielectric value guaranteed. Determined by space value. |
Natural, Black |
| CC-1 | Custom Coated Fiberglass | Wear resistance Automotive, aerospace and commercial wire assemblies |
C (240°C) -43°C to +650°C |
Grade C3 No dielectric value guaranteed. Determined by space value |
Carbon Black, Titanium White |
The values listed in this bulletin, to the best of our knowledge, are accurate. They are typical performance results and are not intended to be used as design data. We disclaim all liability in connection with the use of information contained herein or otherwise.
Other braided fiberglass products are available to meet your specific application.
Prefer to speak with a technical sales representative?
Click here to email us or
phone Grayline at 1-800-669-7986