Grayline MD65-PVC is a non-toxic flexible tubing that is made from a high purity grade vinyl compound. The soft material is very flexible and ideal for installation over barbed fittings or around sharp radius curves. MD65-PVC can be used in a wide variety of medical applications and can withstand EtO (Ethylene Oxide) and autoclave sterilization methods.
|PROPERTY||TYPICAL VALUE||TEST METHOD|
|Durometer Hardness, Shore A (15sec.)||65||ASTM D2240|
|Tensile Strength (psi)||1700||ASTM D412|
|Elongation (%)||375||ASTM D412|
|Specific Gravity||1.17||ASTM D792|
|Brittleness Temperature, Pass °C||-40||ASTM D746|
(inches of Hg)
The values listed in this bulletin, to the best of our knowledge, are accurate. They are typical performance results and are not intended to be used as design data. We disclaim all liability in connection with the use of information contained herein or otherwise. Working pressures and vacuum ratings are based on a combination of actual test data and derived values. Working pressures are calculated at 1:5 ratio of burst pressure determined per ASTM D1599. The selection of size and material for any particular application is the user’s responsibility. The designer must consider many factors (e.g. temperature, fluid, connections, etc.) when specifying the tubing.
All Grayline products meet the specifications listed. Grayline medical tubing products are sold upon condition that purchasers shall make their own assessment of suitability of specific tubing products for their particular application or use. Purchasers assume all risks and liability for the use of these products, including use in accordance with the seller’s recommendations. Grayline tubing is not intended for use as an implant material.