Home >> Search For Tubing >> Search for Non-Heat Shrinkable Tubing >> MD80-RO-PVC
Grayline MD80-RO-PVC is a specialty material made from our non-DEHP, MD80-GS-PVC, which has been tested and certified to USP Class VI and can withstand gamma radiation, EtO (Ethylene Oxide) and autoclave sterilization methods. This material contains an FDA-grade, radio-opaque pigment which obstructs the passage of radiant energy and allows the material to be detected on x-ray photographs.
PROPERTY | TYPICAL VALUE | TEST METHOD |
---|---|---|
Durometer Hardness, Shore A (15sec.) | 80 | ASTM D2240 |
Tensile Strength (psi) | 2700 | ASTM D412 |
Elongation (%) | 350 | ASTM D412 |
Specific Gravity | 1.23 | ASTM D792 |
The values listed in this bulletin, to the best of our knowledge, are accurate. They are typical performance results and are not intended to be used as design data. We disclaim all liability in connection with the use of information contained herein or otherwise.
All Grayline products meet the specifications listed. Grayline medical tubing products are sold upon condition that purchasers shall make their own assessment of suitability of specific tubing products for their particular application or use. Purchasers assume all risks and liability for the use of these products, including use in accordance with the seller’s recommendations. Grayline tubing is not intended for use as an implant material.
Prefer to speak with a technical sales representative?
Click here to email us or
phone Grayline at 1-800-669-7986